Kramer Electronics Ltd.
UHD Matrix Switcher
– Using the Embedded Web Pages
32
Setting Inputs 1, 3, 5 and 7
Device Name
Relevant Inputs
VS-88UHD
1, 3, 5 and 7
VS-66UHD
1, 3, and 5
VS-84UHD
1, 3, 5 and 7
VS-48UHD
1 and 3
To adjust input 1, 3, 5 and 7 settings:
1. In the Navigation pane, click
Switching
. The Switching page appears.
2. Select the
AFV
tab. Verify that
Inputs
(and not
Patterns
) is selected.
3. Click
. The input settings window appears:
Figure 28: Switching Page
– Input 1 Settings Window
4. If required, type the label name in the
Label
text box and click
.
5. Set HDCP
ON
or
OFF
.
6. Click
ARC
to set the input to ARC mode or click
Step-in
to set input to step-in mode.
7. In ARC mode click the settings button (
).
The input ARC Settings window appears:
Figure 29: Switching Page
– Input ARC Settings Window
8. Select an ARC source for input 1 from HDMI outputs 1 to 8.
The selected output ARC signal routes its audio signal to HDMI input 1 (the default).