Kramer Electronics Ltd.
VS-88H2
–
Operating
VS-88H2 via Front Panel Buttons
23
Setting Switching Mode
Set the following
switching modes separately for each output:
•
Manual mode (
IN 1
): inputs are switched to outputs via the front panel buttons.
•
Priority mode (
IN 2
): the
VS-88H2
switches the source with the highest priority to the
output.
•
Last connected mode (
IN 3
): the last detected active source is switched to the output.
To select the switching mode:
1. Press
RCL
and
MUTE/PATTERN
simultaneously.
Both buttons illuminate.
2. Press an output button (or press
ALL
).
The corresponding 7-segment display LEDs flash and LOCK button flashes.
3. Press
IN 1
,
IN 2
or
IN 3
.
4. Press
LOCK
.
The switching mode is set for the selected output.
Setting Switching Speed
Set the following switching speed modes separately for each output:
•
Extra-Fast switch speed (
IN 1
).
•
Fast switch speed (
IN 2
).
•
Normal switch speed (
IN 3
).
To select the switching speed:
1. Press
STO
and
MUTE/PATTERN
simultaneously.
Both buttons illuminate and the 7-segment display LEDs show the current switch speed
for each port.
2. Press an output button (or press
ALL
).
The corresponding 7-segment display LEDs flash and
LOCK
button flashes.
3. Press
IN 1
,
IN 2
or
IN 3
and press
LOCK
.
The selected switching speed is set.
