Kramer VS-3232DN-EM, User Manual

Page: 121 / 128

Kramer Electronics Ltd.
VS-3232DN-EM
– Protocol 3000
118
H-PHASE
Functions Permission Transparency
Set
H-PHASE
End User Public
Get
H-PHASE?
End User Public
Description Syntax
Set Set H-Phase value
# H-PHASE SPstage,channel,valueCR
Get Get H-Phase value
#H-PHASE ? SPstage,channelCR
Response
~nn@ H-PHASE SPstage,channel,valueCR LF
Parameters
stage
–
1/IN
(input),
2/OUT
(output)
channel
– input or output number:
1-32
(varies according to installed input / output cards, see Port
Numbering on page 14 )
value
– H-Phase value in Kramer units:
0-63
,
++
(increase current value),
--
(decrease current value)
Response Trigger
Notes
A minus sign precedes negative values
This command is only valid for VGA cards
K-Config Example
Set the H-Phase value of output 8 to 60:
“#H - PHASE 2,8,60”,0x0D
Increase the H-Phase value of input 5 by 1 unit:
“#H - PHASE 1,5,++”,0x0D
Audio Commands
Command Description
AUD-LVL
Set/get audio level in specific amplifier stage
BALANCE
Set/get balance level
BASS
Set/get audio bass level
MIX
Set/get audio mix setting (stereo / mono)
MUTE
Set/get audio mute setting
TREBLE
Set/get audio treble level
VOLUME
Set/get simple audio volume