VS-1616D - Operating Your Video Matrix Switcher
25
In 14 => Out 12
Incomplete actions time out after approximately 15 seconds.
•
In the Confirm mode, press the flashing TAKE button to switch the input to
the output
6.4.2
Switching Several Inputs to Several Outputs
If you want to switch several inputs to several outputs you must be in the Confirm
mode.
In the Confirm mode you can enter a batch of several actions and then confirm the
batch by pressing TAKE once (simultaneously switching several output-input
combinations).
To switch several inputs to several outputs in the Confirm mode:
1. Using the numeric keypad, enter an output-input combination.
The TAKE button flashes.
2. Enter additional output-input combinations.
The LCD display can show up to five pending actions (although the batch is
not limited to five actions), as follows:
09 => 06 05 => 07
In this example, input 9 is set to switch to output 6 and input 5 is set to
switch to output 7.
3. After entering all output/input combinations, press the flashing TAKE button
to confirm the actions.
The inputs switch to the respective outputs as shown on the LCD display
and the TAKE LED is lit.
6.4.3
Turning an Output Off
Turning an output off means that there is no input switched to this output. This is
indicated on the display by the Input being blank underneath the relevant Output.
