©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
30
6.1.2.7
Custom Modes
From this menu the user can create up-to four custom progressive or interlaced resolutions to
interface with sources providing non-standard video format. These custom resolutions can also be
selected in the EDID selection for each input. Custom resolutions are not available for the SDI inputs.
This menu is available on selected models.
Settings:
CMx Width: from 640 to 4096; CMx Height: from 480 to 2160; CMx Scan Type:
Progressive/Interlaced
Default :
CMx Width: 1920; CMx Height: 1080; CMx Scan Type: Progressive
6.1.3
Colour Adjustments
6.1.3.1
Black-Level Offset
Used to select 7.5 IRE black level set-up adjustment. Should always be set to 7.5 IRE for HDMI video
and NTSC video inputs and should usually be off for PAL analog video inputs.
Settings:
0 IRE, 7.5 IRE
Default :
0 IRE
6.1.3.2
Brightness (Black-Level)
Brightness controls the offset applied to the video signal. (same as the brightness control on a TV)
Settings:
-50 to 50 in steps of 1
Default :
0
6.1.3.3
Contrast
Contrast controls the gain applied to the video signal.
Settings:
-50 to 50 in steps of 1
Default :
0
6.1.3.4
Saturation
Controls the video colour saturation, (applies individually to all video inputs but not computer input
signals or formats).
Settings
: -50 to 50 in steps of 1
Default :
0
6.1.3.5
Hue
Adjusts the colour hue of NTSC signals. This is not applicable for computer input signals or formats.
Settings:
-50 to 50 in steps of 1
Default :
0
