VP-733
–
Configuring the VP-733 via the OSD MENU Screens
37
Feature
Function
Font Size
Select the text overlay font size
Logo
Logo Enable
Enable the logo to appear on screen
Logo Position
Set the position of the logo
Communication Interface Area
Connect/Disconnect
Connect the machine or disconnect
RS-232 Check box
When selected, set the
COM port
and
Baud Rate
(9600) to
connect via the RS-232 connector
Current Status
Indicates whether there is a valid connection to the
VP-733
Scrolling Mode Area
Speed
Dropdown Box
Set the speed at which the text moves on the display
Mode
Set to Still (fixed text) or Scrolling (text moves across the
display)
Left to Right
Set direction of the scrolling text
Send Text Area
Message
Type the desired text in the
Message
box
H-Offset (Still Mode)
Dropdown Box
After selecting the Still
mode, use the
H-Offset
box to select
the horizontal position of the text (Left Center or Right)
Operation Buttons
Start Button
Click to display the text on screen
Stop Button
Click to stop scrolling on screen
Quit Button
Click to quit the program
Load Setting Button
Click to load a previously saved setting
Save Setting Button
Click to save the current setting
7.6.4
The Input Functions
The following table defines the input settings:
Setting
Function
Default
Custom
Custom Input from Custom 1 to custom 4
Custom 1
HT
Horizontal Total
HW
Horizontal sync pulse width
HS
Horizontal active start point
HA
Horizontal active region
HP
Horizontal polarity
VT
Vertical Total
VW
Vertical sync pulse width
VS
Vertical active start point
VA
Vertical active region
VP
Vertical polarity
OCLK
Output clock
Enable
Set to On to enable parameter change
Off
Save
Apply settings
N/A
