Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
15
Selecting an Input Signal
Select the
VP-554X
input source for the selected OSD output.
To set the input source:
1. On the front panel press
MENU
. The menu appears.
2. Select
VIDEO
then select
SOURCE
.
3. Press
ENTER
and select HDMI (1 to 6), HDBT (1 to 4) or PC.
4. Press
ENTER
.
An input signal is selected.
Selecting the Image Size
Set the image size on the selected OSD output.
To set the image size:
1. On the front panel press
MENU
. The menu appears.
2. Select
VIDEO
then select
SIZE
.
3. Press
ENTER
and select FULL, BEST FIT, PAN SCAN, LETTER BOX, UNDER 2,
UNDER 1, FOLLOW IN or OVER SCAN.
4. Press
ENTER
.
The image size is selected.
Setting Output Resolution
VP-554X
enables setting the resolution on the selected OSD output via the OSD MENU
buttons.
The resolution is set only for the output that is selected (via the front panel OSD
SELECT button) to show the OSD.
