Kramer VP-440X, User Manual, Page: 27 / 71

Kramer Electronics Ltd.
VP-440X
– Using Embedded Webpages
25
•
Upgrading Firmware on page 29 .
•
Configuring Network Settings on page 31 .
•
Configuring Video Output Settings on page 32 .
•
Configuring HDCP per Input/Output on page 34 .
•
Managing EDID on page 35 .
•
Adjusting Audio Input Settings on page 37 .
•
Adjusting Microphone Settings on page 38 .
•
Defining Additional Audio Settings on page 38 .
•
Setting Equalizer on page 38 .
•
Setting Auto Sync Off on page 39 .
•
Configuring Automatic Switching Settings on page 40 .
•
Defining Lock Mode on page 40 .
•
Controlling via the RS-232 Terminal Block Connectors on page 41 .
•
Password Protecting Webpage Access on page 44 .
Loading and Saving Configurations
VP-440X enables you to save a configuration to recall it in the future.
Saving a Configuration
To save the current configuration:
1. Configure the device as required.
2. In the Navigation pane, click Switching . The Switching page opens ( Figure 9 ).
3. Click Save .
The Save File window appears.
When using Chrome, the file is automatically saved in the Downloads folder.
The current configuration is saved.
Loading a Configuration
To load a configuration:
1. In the navigation pane click Switching . The Switching page opens ( Figure 9 ).
2. Click Upload .
An Explorer window opens.
3. Select the required file and click Open .
The device is configured according to the saved preset.