Kramer Electronics Ltd.
VP-439
– The RS-232/Ethernet (UDP) Communication Protocol
39
NET-DHCP
Functions
Permission
Transparency
Set:
NET-DHCP
Administrator
-
Get:
NET-DHCP?
End User
-
Description
Syntax
Set:
Set DHCP mode
#
NET-DHCP
␠
P1
␍
Get:
Get DHCP mode
#NET-DHCP?
␍
Response
Set: ~
nn
@
NET-DHCP
␠
P1
␠
OK
␍␊
Get: ~
nn
@
NET-DHCP
␠
mode
␍␊
Parameters
P1
– 0=Static IP; 1=DHCP
0
– Use static IP.
1
– Use DHCP. If unavailable, use IP as above.
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks.
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port
if available.
For proper settings consult your network administrator.
ROUTE
Functions
Permission
Transparency
Set:
ROUTE
End User
-
Get:
ROUTE?
End User
-
Description
Syntax
Set:
Set layer routing
# ROUTE
␠
P1,P2,P3
␍
Get:
Get layer routing
# ROUTE
?
␠
P1,P2
␍
Response
~
nn
@
ROUTE
␠
P1,P2,P3
␍␊
Parameters
P1 (Layer number)
–12=Video+Audio
P2
– 1=Scaler
P3
– video inputs (0~2) – 0=HDMI; 1=PC; 2=Video (CV);
Notes
This command replaces all other routing commands.
