Kramer Electronics Ltd.
VP-427X2
– Using Embedded Web Pages
30
2. Open the Resolution drop-down box and select the required output resolution or select
one of the following:
▪
Native
– sets the output resolution to match the native resolution of the connected
device.
3. Open the Size drop-down box and select the video size on the display: Over Scan, Full,
Best Fit, Pan Scan, Letter Box, Under 2, Under 1 and Follow In.
4. In the Picture area, use the slider controls to adjust the display picture quality.
5. Open the Noise Reduction drop-down box and select the level of noise reduction or
select Off.
Output settings are defined.
Configuring HDCP per Input/Output
VP-427X2
enables you to configure HDCP individually for each input/output.
To configure HDCP:
1. Click
HDCP
on the Navigation List.
The HDCP page appears.
Figure 21: The HDCP Page
2. In the On Output area, click one of the following:
▪
Input
– signal is outputted with HDCP encryption when the input includes HDCP
encryption.
▪
Output
– signal is always outputted with HDCP encryption when the output acceptor
supports it (even if the input does not include encryption).
3. In the On Input area, click
ON
or
OFF
for each of the inputs to turn on or off the HDCP
encryption for that input.
HDCP settings are defined.
