Kramer Electronics Ltd.
VP-427X1
– Operating and Controlling VP-427X1
12
Setting Output Parameters
VP-427X1
enables setting output parameters such as the size of the image and output
resolution via the OSD MENU buttons.
To set the output parameters:
1. On the front panel press
MENU
. The menu appears.
2. Click
Output
and define the output parameters according to the information in the
following table:
Menu Item
Function
Size
Set the size of the image: Best Fit (default), Full, Over Scan, Follow In, Under 1, Under
2, Letter Box, Pan Scan.
Resolution
Select the output resolution (default, Native):
1024x768 @60Hz
1920x1080P @30Hz
720x480P @60Hz
1440x900 @60Hz
800x600 @60Hz
1920x1080P @25Hz
2560x1600 @60Hz RB
1400x1050 @60Hz
640x480 @60Hz
1920x1080P @24Hz
1280x720 @60Hz
1360x768 @60Hz
3840x2160P @60Hz
1920x1080P @50Hz
1920x1080 @60Hz
1280x1024 @60Hz
3840x2160P @50Hz
1280x720P @50Hz
2560x1600 @60Hz RB
1280x800 @60Hz
3840x2160P @30Hz
720x576P @50Hz
1920x1200 @60Hz RB
1280x768 @60Hz
3840x2160P @25Hz
1920x1080P @60Hz
1680x1050 @60Hz
3840x2160P @24Hz
1280x720P @60Hz
1600x1200 @60Hz
Image size and output resolution are defined.
Setting Audio Parameters
VP-427X1
enables defining the audio delay time and output volume.
To set the audio:
1. On the front panel press
MENU
. The menu appears.
2. Click
Audio
and define the following:
▪
Set the audio delay time (lip sync) to off, 40ms (default),110ms or 150ms.
▪
Set the AUDIO OUT output volume (default is 80 = 0dB).
Audio parameters are defined.
