VP
‑
424C
Quick Start
P/N:
2 9 0 0 - 3 0 1 0 5 6 QS
Rev: 1
Scan for full manual
VP
‑
424C Quick Start Guide
This guide helps
YWOU
install and use your
VP
‑
424C
for the first time.
www.kramerav.com/downloads/VP-424C
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
VP
‑
424C
4K HDMI/USB
‑
C Scaler
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your VP
‑
424C
#
Feature
Function
1
ON LED
Lights green when the unit is powered.
2
INPUT Button
Press to toggle the input between HDMI and USB-C.
3
HDMI
™ LED
Lights when the HDMI input is selected.
4
USB-C LED
Lights when the USB-C input is selected.
5
MENU Button
Press to enter/escape the on-screen display (OSD) menu. Press together with
the
– button to reset to 1080p (RESET TO 1080P).
6
ENTER Button
In OSD, press to choose the highlighted menu item. Press together with the
+ button to reset to XGA (RESET TO XGA).
7
– Button
In OSD, press to move backward through the list or to decrement the
parameter value.
8
+/FREEZE Button
In OSD, press to move forward through the list or to increment the parameter
value. When not in OSD, press to freeze the display.
9
PROG USB Connector
Connect to a USB memory stick for upgrading the firmware.
10
USB-C IN USB Type C Port
Connect to a USB type-C audio-video source.
11
HDMI™ IN Connector
Connect to an HDMI source.
12
HDMI
™ OUT
Connector
Connect to an HDMI acceptor.
13
REMOTE 3-pin Terminal Block Connector
Connect to contact closure switches (by momentary contact between the
desired pin and GND pin) to select an input.
14
5V DC
+5V DC connector for powering the unit.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
