Kramer VM-80VN, Quick Start Manual

Page: 1 / 2

VM-80VN Quick Start
P/N: 2 9 0 0 - 3 0 1 2 6 3 QS Rev: 3
Scan for full manual
VM-80VN Quick Start Guide
This guide helps you install and use your VM-80VN for the first time.
Go to www.kramerav.com/downloads/VM-80VN to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
VM-80VN 1:8 Video Distributor
4 Rubber feet
1 Power supply (12V DC)
1 Quick start guide
Step 2: Get to know your VM-80VN
This section defines the VM-80VN .
# Feature Function
1 POWER LED Illuminates when the device is powered on
2 CH2 ADJ HF Trimmer Adjusts the CH2 cable compensation equalization level
3 CH2 ADJ Level Trimmer Adjusts the CH2 video gain level
4 CH1 ADJ HF Trimmer Adjusts the CH1 cable compensation equalization level
5 CH1 ADJ Level Trimmer Adjusts the CH1 video gain level
6 CH 1 IN BNC Connector Connects to the CH1 video source
7 CH 1 IN 75
Ω
Pushbutton
Press in for CH1 75Ω termination, release for no termination
8 1:8 Pushbutton Press in for 1:8 operation, release for 1:4 operation
9 CH 2 IN BNC Connector Connects to the CH2 video source
10 CH 2 IN 75
Ω
Pushbutton
Press in for CH2 75Ω termination, release for no termination
11 CH 1 OUT BNC Connector Connects to the CH1 video acceptor(s) (from 1 to 4)
12 CH 2 OUT BNC Connector Connects to the CH2 video acceptor(s) (from 1 to 4)
13 12V DC Connector Connector for attaching the 12V DC power supply