Kramer Electronics Ltd.
VP-440
– Using the Embedded Web Pages
35
To control VP-440 via RS-232:
1. Connect your controlling device (e.g., PC) to the Input Select connector
Connecting the VP-440 via the INPUT SELECT Terminal Block Connector
).
2. Click
RS-232
on the Navigation List.
The RS-232 page appears.
3. Set
Use RS-232 Port for control of
to
Scaler
.
Controlling an External Device via the RS-232
Terminal Block Connectors
To control an external device via RS-232:
1. Connect your external device to the CTRL connector
).
2. Click
RS-232
on the Navigation List.
The RS-232 page appears.
3. Set
Use RS-232 Port for control of
to
External Device
.
4. Set RS-232 External configuration parameters.
5. Add a command:
a. Create a command name and description.
b. Add a trigger (On, Off, Sync/Clocks, No Sync/No Clocks).
c. Select the delay time.
d. Click
Add
.
6. Check
Enable
.
2
4
