Kramer Electronics Ltd.
VP-440
– Using the Embedded Web Pages
27
Configuring Video Output Settings
VP-440
enables you to configure settings for the video that is passed through the HDBT and
HDMI outputs.
To configure video output settings:
1. Click
Output Settings
on the Navigation List.
The Output Settings page appears.
Figure 24: The Output Settings Page
2. Open the Resolution drop-down box and select the required output resolution or select
one of the following:
▪
Native HDBT
– sets the output resolution to match the native resolution of the device
connected to HDBT OUT.
▪
Native HDMI
– sets the output resolution to match the native resolution of the device
connected to HDMI OUT.
3. Open the Size drop-down box and select the video size on the display:
▪
Best Fit
▪
Full
▪
Pan Scan
▪
Letter Box
▪
Under Scan
▪
Follow In
4. In the Picture area, use the slider controls to adjust the display picture quality.
5. Open the Noise Reduction drop-down box and select the level of noise reduction or
select Auto.
