Kramer Electronics Ltd.
VP-440
– Using the Embedded Web Pages
23
Configuring Video Input Settings
VP-440
enables you to individually configure settings for each of the video inputs.
To configure video input settings:
1. Click
Input Select
on the Navigation List.
The Input Select page appears (
Figure 16: Web Pages
– Input Select Page
2. In the Video Switching area, click the edit icon on the right side of the relevant video
input.
The settings window appears for the selected input.
Figure 17: Setting Window for Input 1
Figure 18: Setting Window for Input 5
3. If required, enter a new name and click the save icon to change the name of the input
that appears in the web pages.
4. Click
ON
/
OFF
to enable/disable the HDCP decryption on the selected input.
