Kramer VM-3HN, User Manual, Page: 11 / 16

8 VM-3HN - Connecting the VM-3HN
4.2 Force RGB Mode
The VM-3HN
toggles between “Normal” and “Force RGB” modes.
To toggle:

Press the EDID button for three seconds
All input and outputs LEDs flash depending on the selected mode:
 In “Normal mode” (not forcing RGB), the LEDs flash once
 In “Force RGB mode”, the LEDS flash four times
Note: After setting the Force RGB mode you must re-read the EDID from the
display to update the Force RGB change.
Powering on the device identifies the mode as follows:

In “Normal mode” (not forcing RGB), the LEDs flash once

In “Force RGB mode”, the LEDS flash four times.
The default mode is "Normal".