background image

Kramer Electronics Ltd. 

 

VM-2H2 

– Default EDID 

11 

 

Default EDID 

Monitor 

  Model name............... VM-2H2 

  Manufacturer............. KMR 

  Plug and Play ID......... KMR1200 

  Serial number............ n/a 

  Manufacture date......... 2016, ISO week 14 

  Filter driver............ None 

  ------------------------- 

  EDID revision............ 1.3 

  Input signal type........ Digital 

  Color bit depth.......... Undefined 

  Display type............. RGB color 

  Screen size.............. 520 x 320 mm (24.0 in) 

  Power management......... Standby, Suspend, Active off/sleep 

  Extension blocs.......... 1 (CEA-EXT) 

  ------------------------- 

  DDC/CI................... n/a 

Color characteristics 

  Default color space...... Non-sRGB 

  Display gamma............ 2.20 

  Red chromaticity......... Rx 0.674 - Ry 0.319 

  Green chromaticity....... Gx 0.188 - Gy 0.706 

  Blue chromaticity........ Bx 0.148 - By 0.064 

  White point (default).... Wx 0.313 - Wy 0.329 

  Additional descriptors... None 

Timing characteristics 

  Horizontal scan range.... 30-83kHz 

  Vertical scan range...... 56-76Hz 

  Video bandwidth.......... 170MHz 

  CVT standard............. Not supported 

  GTF standard............. Not supported 

  Additional descriptors... Established timings 

  Preferred timing......... Yes 

  Native/preferred timing.. 1920x1080p at 60Hz 

    Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync 

Standard timings supported 

     640 x  480p at  60Hz - IBM VGA 

     640 x  480p at  72Hz - VESA 

     640 x  480p at  75Hz - VESA 

     800 x  600p at  60Hz - VESA 

     800 x  600p at  72Hz - VESA 

     800 x  600p at  75Hz - VESA 

    1024 x  768p at  60Hz - VESA 

    1024 x  768p at  70Hz - VESA 

    1024 x  768p at  75Hz - VESA 

    1280 x 1024p at  75Hz - VESA 

    1600 x  900p at  60Hz - VESA STD 

    1280 x  800p at  60Hz - VESA STD 

    1600 x 1200p at  60Hz - VESA STD 

    1024 x  768p at  85Hz - VESA STD 

     800 x  600p at  85Hz - VESA STD 

     640 x  480p at  85Hz - VESA STD 

    1152 x  864p at  75Hz - VESA STD 

    1280 x  960p at  60Hz - VESA STD 

     848 x  480p at  60Hz - VESA 

    1280 x  768p at  60Hz - VESA 

    1280 x 1024p at  60Hz - VESA 

    1360 x  768p at  60Hz - VESA 

    1440 x  900p at  60Hz - VESA 

    1400 x 1050p at  60Hz - VESA 

    1680 x 1050p at  60Hz - VESA 

EIA/CEA-861 Information 

  Revision number.......... 3 

  IT underscan............. Supported 

  Basic audio.............. Supported 

  YCbCr 4:4:4.............. Supported 

  YCbCr 4:2:2.............. Supported 

  Native formats........... 0 

  Detailed timing #1....... 720x480i at 30Hz 

    Modeline............... "720x480" 8.490 720 808 852 1000 480 488 498 570 inthsync +vsync 

  Detailed timing #2....... 852x480p at 60Hz (16:9) 

    Modeline............... "852x480" 49.450 852 1380 1424 1572 480 484 489 525 +hsync +vsync 

  Detailed timing #3....... 1366x768p at 50Hz (16:9) 

    Modeline............... "1366x768" 84.650 1366 1894 1938 2086 768 772 777 813 +hsync +vsync 

  Detailed timing #4....... 1366x768p at 60Hz (16:9) 

    Modeline............... "1366x768" 101.610 1366 1894 1938 2086 768 772 777 813 +hsync +vsync 

Summary of Contents for VM-2H2


















Reviews: