Kramer VIA GO2 User Manual Download Page 65

Page: 65 / 86

Kramer Electronics Ltd.

VIA GO²

– For Web Administrator: Configuring Settings – Gateway Management Pages

Activating VIA Gateway License

VIA GO²

enables you to upload and activate your

VIA GO²

license.

To upload your VIA GO² license:

1. Select

UTILITY

VIA License

on the navigation pane.

The VIA License page appears.

Figure 69: VIA License Page

2. Click

Browse File

A file browser opens.

3. Select the relevant license file.

4. Click

Upload

The license is installed on

VIA GO²

and license information appears at the bottom of the

page.

To Activate your VIA GO² license:

If a Digital License is already installed on your device, the name of the license appears on the
bottom of the page.

1. Select

UTILITY > VIA License

on the navigation pane.

The VIA License page appears.

2. Click Activate License.

The

VIA GO²

license is activated, and license information appears at the bottom of the

page.

Digital Signage License

VIA GO² devices have a built-in digital signage license.

Summary of Contents for VIA GO2























































































Search results

Summary of Contents for VIA GO2

Reviews:

Related manuals for VIA GO2

Brands by name

Popular brands

Kramer VIA GO2, User Manual

Search results

Summary of Contents for VIA GO2

Reviews:

Related manuals for VIA GO2

Brands by name

Popular brands