Kramer TP-594Rxr, User Manual

Page: 40 / 67

Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
38
3. Click Copy and follow the instructions on-screen. A confirmation message appears.
Figure 43: EDID Confirmation Message
4. Click OK .
5. EDID is copied Successfully.
To copy an EDID from the output to the input:
1. In the Navigation pane, click EDID . The EDID management page appears.
2. Select the output:
▪
TP-594Txr
– Click
HDBT OUT .
▪
TP-594Rxr
– Click
HDMI OUT .
3. Click Copy . A confirmation message appears.
4. Click OK .
The EDID is copied to the input.
To load a custom EDID file:
1. In the Navigation pane, click EDID . The EDID management page appears.
2. In the File area, click Choose a file to browse for the custom EDID file location.
3. Open the custom EDID file.
4. Click Copy and follow the instructions on-screen.
Defining TP-594Rxr Gateway and Ports Activation
Use the TP-594Rxr Control Gateway page to either extend HDMI-CEC, RS-232 and IR
commands bidirectionally via the HDBT link, or send them over the Ethernet to control
peripheral devices that are connected to
TP-594Rxr , for example, control a display that is
connected to the HDMI OUT connector via CEC commands. CEC commands and responses
can be routed both via gateway and HDBT simultaneously.
DRAFT