Kramer TP-594Rxr, User Manual

Page: 27 / 67

Kramer Electronics Ltd.
TP-594Txr, TP-594Rxr
– Using the Embedded Web Pages
25
Using the Embedded Web Pages
Use the embedded web pages to operate TP-594Txr and TP-594Rxr remotely. You can view
both web pages when they are connected to each other via HDBT and at least one of them is
connected to the Ethernet.
The web pages are accessed using a Web browser and an Ethernet connection.
In this section, TP-594Txr web pages are used to describe both devices
’ pages except when
there are differences, which are described separately.
Before attempting to connect:
•
Perform the procedures in Configuring the Ethernet Port on page 24 .
•
Ensure that your browser is supported.
The following operating systems and Web browsers are supported:
Operating Systems Versions
Windows 7 IE
Firefox
Chrome
Safari
Windows 10 IE
Edge
Firefox
Chrome
Mac Safari
iOS Safari
Note that some features might not be supported by some cellphone operating systems.
Browsing the Web Pages
By default, both devices are set to DHCP.
Figure 27: Using the Embedded Web pages
– Default IP Address
Each device has its own unique web page.
To browse the Web pages:
1. Open your browser:
▪
When DHCP is ON
– Access the web page for each device by entering the device
name in the address bar of your browser.
DRAFT