SID-X1N
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 2 2 QS
Rev: 5
Scan for full manual
SID-X1N Quick Start Guide
This guide helps you install and use your
SID-X1N
for the first time.
www.kramerav.com/downloads/SID-X1N
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
SID-X1N
Step-in Commander
1 Set of rack ears
1 Power adapter (12V DC output)
1 Power cord
IMPORTANT NOTICE!
We highly recommend using only Kramer UNIKAT cables with these products. If using 3
rd
party shielded CAT-6A cables, both ends of the
shield must be soldered to the connectors for the products to function properly. Do not use any jumpers, unshielded wall plates or mid-
span cable connections. These extenders are not compatible with HDBaseT technologies. Prior to signal extension, ensure that the
extension line cable is lying straight and not coiled.
Step 2: Get to know your SID-X1N
#
Feature
Function
1
AUDIO IN 3.5mm Mini Jack
Connect to an unbalanced stereo audio source
2
HDMI
LED
Lights green when the HDMI input is selected
3
HDMI Connector
Connect to an HDMI source
4
DisplayPort
LED
Lights green when the DisplayPort input is selected
5
DP Connector
Connect to a DisplayPort source
6
DVI
LED
Lights green when the DVI input is selected
7
DVI Connector
Connect to a DVI source
8
PC-UXGA
LED
Lights green when the PC-UXGA input is selected
9
PC-UXGA 15-pin HD
Connector (F)
Connect to a PC graphics source
10
INPUT SELECT Button
Press repeatedly to cycle through the inputs manually to select an input, (overrides
automatic selection).
Note: When the button is lit it is inactive and pressing the button will not activate the
input
11
STEP-IN Button
Press to activate the input on the switcher that the
SID-X1N
is connected to
12
ON LED
Lights green when the device is powered on
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
