RTBUS-24
Quick Start
P/N: 2 9 0 0 - 3 0 0 8 9 8 QS
Rev: 3
Scan for full manual
RTBUS-24 Quick Start Guide
This guide helps you install and use your
RTBUS-24
for the first time.
www.kramerav.com/manual/RTBUS-24
to download the latest user manual
Step 1:
Check What’s in the Box
RTBUS-24
Round Table Connection Bus
1 Clamps set
1 User manual
1 Quick start guide
Step 2: Get to know your RTBUS-24
#
Feature
Function
1
Pop-up Lid
Covers the connecting surface, leaving the
table surface neat and tidy.
2
Outer Rim
Fits over a table surface.
3
Pneumatic Mechanism
Enables automatic lifting and smooth
closing of the lid.
4
Connecting Surface
See items 12 to 15 for a detailed
description of the connecting surface.
5
Rubber Protectors (x2)
Protect the table surface when mounting
the unit.
6
Locking Butterfly Nuts (x2)
Tighten to lock the mounting butterfly
screw.
7
Mounting Screws (x2)
For securing the
RTBUS-24
to the table.
8
Mounting Butterfly Nuts
(x2)
Tighten to secure the unit to the table
surface.
9
Mounting Brackets (x2)
Place in the bracket slits after inserting the
enclosure into the table, for securing the
unit to the table surface.
10
Mounting Bracket Slits (two
slits on each side)
Insert the mounting brackets to the slits
when installing the
RTBUS-24
.
11
HDMI Cable
Connect to an HDMI acceptor.
12
5A/125V Power Connector
(x2)
Connect to up to two US power consuming
devices simultaneously.
When a single power socket is connected, consumption should
not exceed 5A.
When both power sockets are connected, the total consumption
should not exceed 6A.
13
5V-2A USB CHARGING
Port (x2)
Use to charge up to two devices
simultaneously.
14
Lid Latch
For safely closing the lid.
15
HDMI Connector
Connect to an HDMI source.
