TP-121EDID,
TP-123EDID, TP-125EDID, PT-110EDID
Quick Start
P/N: 2 9 0 0 - 3 0 1 2 7 2 QS
Rev: 4
Scan for full manual
TP-121EDID, TP-123EDID, TP-125EDID,
PT-110EDID Quick Start Guide
This guide helps you install and use your
TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID
for the first
time.
www.kramerav.com/downloads/TP-121EDID
to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check
what’s in the box
TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID
XGA/TP Transmitter
4 Rubber feet
1 Power supply (12V DC)
1 Quick start guide
Step 2: Get to know your TP-121EDID, TP-123EDID, TP-125EDID, PT-110EDID
Figure 1: TP-121EDID XGA/Audio Line Transmitter
#
Feature
Function
1
EDID
CAPTURE
Button
Press to capture the EDID information from the display
2
STATUS
LED
Illuminates during normal operation; flashes when acquiring the EDID
3
ON
LED
Illuminates when receiving power
4
XGA IN 15-pin HD (F) connector
Connects to the XGA source
5
LINE OUT RJ-45 connector
Connects to the LINE IN RJ-45
connector on a receiver
Using a CAT 5 cable with RJ-45 connectors at both ends
6
AUDIO IN
3.5mm mini jack
Connects to the audio source
7
12V DC
+12V DC connector for powering the unit
Figure 2: TP-123EDID XGA/Audio/Data Line Transmitter
#
Feature
Function
1
EDID
CAPTURE
Button
Press to acquire the EDID information from the display
2
STATUS
LED
Illuminates during normal operation; flashes when acquiring the EDID
3
ON
LED
Illuminates when receiving power
4
XGA IN
15-pin HD (F) connector
Connect to the XGA source
5
LINE OUT
RJ-45
connector
Connects to the LINE IN RJ-45
connector on the
TP-124 XGA/Audio Line Receiver
Use a CAT 5 cable with RJ-45 connectors at both ends
6
RS-232
terminal block connector
Connects to the PC or the Remote Controller
7
AUDIO IN
3.5mm mini jack
Connects to the audio source
8
12V DC
+12V DC connector for powering the unit
