2 9 0 0 - 3 0 0 6 0 8 QS
Rear Panel View
Lower Side View
Right Side View
Left Side View
POE
Ethernet
port (RJ-45)
USB 1
type A
USB 2 type A
Power LED
Mini
HDMI
Micro
USB
Add-On
USB
ON/OFF
switch
DC in
4 Mounting
holes
KRAMER
KT-7 Quick Start Guide
Step 1: Check what’s in the box
AC/DC adapter
1 Quick start guide
The
KT-7
Touch Panel
Tabletop Mount
Step 2: Getting to know your KT-7
To fix the KT-7 to a table
Using 2 screws, attach the base of the touch panel
via
the two mounting holes on the base of the tabletop mount.
Set the tabletop mount to the desired angle.
To install the KT-7 in a podium
:
·
Unscrew the 4 screws attaching the tabletop mount to the touch
panel and remove it.
·
On the surface of the podium mark the place where you want to
install the touch panel.
·
Cut out a rectangle to fit the touch panel at the chosen location.
Kramer Electronics is not responsible for any damage caused to the
podium.
:
to the table
·
·
Step 3: Mounting on a table or podium
KT-7 Quick Start (P/N: 2900-300608QS REV 1)
1
Rev:
RS-232 port 2
RS-232 port 1
Speaker
Speaker
This guide helps you install and use your product for the first time. For more detailed information, g
http://www.kramerav.com/downloads/KT-7
to download the latest QS (or scan the QR code) and check if firmware
upgrades are available.
o to
P/N:
