Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Using KDS-EN7 Embedded Web Pages
42
Viewing KDS-EN7 Status
View the device status.
To view device status:
1. In the Navigation pane, click
Diagnostics
. The Status tab appears.
Figure 32: Diagnostics
– Status Tab
2. View the Device Status:
▪
Active
, for normal operation (green indication).
▪
Standby
, when device is powered Off, booting or in standby mode (yellow
indication).
3. View device internal heat status:
▪
Normal
, for temperatures under 45°C (green indication).
▪
High
, for temperatures between 45°C and 60°C (orange indication).
▪
Overheat
, for temperatures higher than 60°C (red indication).
4. View the input status:
▪
On
, when the input has a valid signal and is transmitting a signal (green indication).
▪
Off
, when an input is not connected or there is no valid signal (gray indication).
5. View HDMI OUT and LAN output status:
▪
On
, when an output is transmitting a signal (green indication).
▪
Off
, when an output has no signal output (gray indication).
Device status is viewed.
