132
K-CONFIG - Adding Actions to a Trigger
9.1
General Instructions
The
Action Editor
area is divided in two. The list of available action types is listed on the left and once an action type
is selected, the available actions appear on the right.
For example, the Switcher Command Action Editor displays the following available action types:
Figure 252: The Action Editor – Available Action Types
Generally, actions are added to triggers via the Action Editor in a similar way:
1.
Select the Trigger.
2.
Select an action type and relevant action.
3.
Click the Add to List button.
The action is added to the trigger.
At any time you can move the action up or down the list, delete it or duplicate it using the icons above the action list.
At any time you can add delete or change a trigger. Note that in some cases it will affect other triggers.
