DIP-22
Quick Start
P/N: 2 9 0 0 - 3 0 1 0 3 8 QS
Rev: 4
Scan for full manual
DIP-22 Quick Start Guide
This guide helps you install and use your
DIP-22
for the first time.
www.kramerav.com/downloads/DIP-22
to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check
what’s in the box
DIP-22
Automatic Video Switcher
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your DIP-22
#
Feature
Function
1
DP++ IN SELECT Button
Press to select the DP++ input. Button lights red when analog audio is selected and
green when embedded audio is selected.
2
DP++ Connector
Connect to a DisplayPort source.
3
HDMI
™ IN SELECT Button
Press to select the HDMI input. Button lights red when analog audio is selected and
green when embedded audio is selected.
4
HDMI IN Connector
Connect to an HDMI source.
5
PC IN SELECT Button
Press to select the PC graphics input. Button lights red when analog audio is selected
and green when embedded audio from the HDMI IN/DP++ IN is selected.
6
PC IN 15-pin HD Connector
Connect to a computer graphics source.
7
AUDIO IN 3.5mm Mini Jack
Connect to an unbalanced stereo audio source.
8
STEP-IN Button
Press to take control of the input that this device is connected to on a compatible
switcher.
9
ON LED
Lights green when
DIP-22
is powered via power adapter or PoE over HDBaseT.
Lights red when
DIP-22
provides PoE over HDBaseT to a compatible PoE acceptor.
#
Feature
Function
10 AUDIO OUT 3.5mm Mini Jack
Connect to an unbalanced, stereo audio acceptor.
11 ETHERNET RJ-45 Connector
Connect to a PC via a LAN to control
DIP-22
.
12 CONTROL (G, Rx, Tx)Terminal
Block Connectors
Connect to the PC or to a serial remote controller to control
DIP-22
.
