KRAL BEM 500 Series, Operating Instructions Manual

Page: 35 / 64

Operating Instructions OIE 12en Edition 2019-02 35
Menu 1: Display
M
e
n
u
d
e
s
c
ri
p
ti
o
n
Note: Depending on the number of decimal
places the total value stops at the following
minimum or maximum values:
In order to avoid this a different unit can be
selected or the number of decimal places
reduced, see "Further faults", page 52.
Resetting the total values:
1. Press SET.
T1 is selected.
2. Press SET for three seconds.
The total value T1 is reset.
3. Press SET.
T2 is selected.
4. Press SET for three seconds.
The page for entering the password is
displayed.
5. Enter the password and press SET.
The total value T2 is reset.
1.03 Volumeter A
The flow rate and temperature in Volumeter A is
displayed on the "Volumeter A" page.
If the temperature lies outside the permissible
range or if a temperature sensor is not
connected, "---,-" is displayed.
When the direction of rotation changes, the
displayed rate value can vary strongly. In this
case the smoothing value of the display has to be
increased, see "2.16 Averaging display rate",
page 39.
1.04 Volumeter A Total with reset
The "Volumeter A Total" page displays the total
value of Volumeter A since the last resetting.
Resetting of the value functions analog to menu
item 1.02.
1.05 Volumeter B
Description analogous to menu item 1.03.
1.06 Volumeter B Total with reset
Description analogous to menu item 1.04.
1.07 Batch quantity
This page is only displayed if the function "Relay
1" in menu 3.13 is set to "Batching", see "3.13
Function relay 1", page 42.
Number of
decimal
places
Minimum
value Maximum
value
3 -1 999 999.999 1 999 999.999
1 -199 999 999.9 199 999 999.9
1.03 Display
Volumeter A
QA: 23.4 l/min
TempA: 22.5 °C
1.04 Display
Volumeter A Total
TA1: 755818.5 l
TA2: 755810.5 l
Line Description
Act. Current batch quantity
Nom. The desired batch quantity can be
set.
1. Press SET.
2. Use ARROW UP and ARROW
DOWN to set the desired value.
3. Press SET.
The cursor changes to the
"Function" display.
Function Press ARROW UP or ARROW
DOWN to select the following
options:
□
"Start": Beginning of batching.
When the set batch quantity is
reached, batching is stopped
automatically. After 3 seconds
waiting period a further start is
possible.
□
"Stop": Interruption of batching
before the set batch quantity
has been reached.
□
"Continue": Batching is
continued.
□
"Cancel": Batching is aborted.
"Start" is displayed and a new
batch process can be started.
► Press SET. The function is
executed.
1.07 Batch quantity
Act.: 0.0 l
Nom.: 0.0 l
Function: Start