KRAL BEM 500 Series, Operating Instructions Manual

Page: 21 / 64

Operating Instructions OIE 12en Edition 2019-02 21
Connection assignments
T
e
c
h
n
ic
a
l
d
a
ta
Ambient conditions
Connection assignments
Pick up Volumeter A
Pick up Volumeter B
Analog outputs
The data logger can be connected to the analog outputs, see "Data acquisition accessories", page 59.
Either the analog outputs 4–20 mA or 0–10 V can be controlled.
Criterion Data
Storage temperature
□
Range -20...+80 °C
Operating temperature
□
Range -20...+70 °C
Humidity
□
97% relative humidity, non-condensing
EMC emitted interference
and immunity to interference
□
EN 61326
Vibration
□
EN 60068–2–47
□
EN 60068–2–64
Shock
□
EN 61373
Isolation
□
> 500 V
Degree of protection
□
IP 65
Connection PNP/NPN Namur Terminal
Pick up A1 U+24 V DC U+8.2 V DC 18
Signal Signal 19
Gnd — 20
Pick up A2
(+ 90°)
U+24 V DC U+8.2 V DC 6
Signal Signal 7
Gnd — 8
Connection PNP/NPN Namur Terminal
Pick up B1 U+24 V DC U+8.2 V DC 29
Signal Signal 30
Gnd — 31
Pick up B2
(+ 90°)
U+24 V DC U+8.2 V DC 39
Signal Signal 40
Gnd — 41
Connection Function Terminal
Analog output 1 4–20 mA Signal 16
Gnd 17
Analog output 2 4–20 mA Signal 27
Gnd 28
Analog output 1 0–10 V Signal 21
Gnd 22
Analog output 2 0–10 V Signal 32
Gnd 33