75
4
© 2020 KOSTAL Solar Electric GmbH
Operation and operating the device
1
Set up the Modbus RTU (RS485) interface
The RS485 A interface is preconfigured for the PIKO
IQ/ PLENTICORE and the RS485 B for the PIKO MP
plus as standard
2
Set up the Modbus TCP interface
3
Advanced Modbus configuration
4
Download / restore the Modbus configuration
Select the devices which are connected to the
RS485 Modbus RTU interfaces or activate the
Modbus TCP functionality if the devices use the Ethernet
(LAN) for communication purposes. In this case, Modbus
TCP communication must also be activated in the
inverter.
INFO
You will find a detailed description of
the Modbus log and how it works in
the Modbus specification (e.g. see
www.modbus.org). Modbus TCP
forms part of the IEC 61158 standard.
4.9 Menu - Modbus settings
2
3
4
5
1
