ABOUT YOUR KOSS ESP/950 ELECTROSTATIC STEREOPHONE
The ESP/950 Electrostatic Stereophone operates by passing a currentless,
electrostatic charge onto opposing capacitor plates which move an intervening,
almost mass-less, semi-conductive diaphragm in conformance with the electrical
signal from the music source.
The ESP/950 is powered by the E/90 Amplifier which connects to any music source
including compact disc and digital audio tape players. The E/90 uses Field Effect
Transistors for high input impedance and outstanding signal sensitivity.
The E/90 Amplifier can be powered by either standard household current or the
battery pack. For the first time, you can enjoy state-of-the-art audiophile sound in a
portable stereophone.
The ESP/950 is covered by the Koss No-Questions-Asked Lifetime Limited
Warranty. If anything ever happens to any part of your ESP/950 System, Koss will
repair or replace that part, no questions asked.
IMPORTANT
To maximize the reproduction quality of the ESP/950 and protect your sound
investment, pleas read and follow the set-up instructions carefully.
If you encounter set-up or performance problems, check the Trouble Shooting Guide
(page3) or call 1-800-USA-KOSS.
SET-UP INSTRUCTIONS
1.
Carefully unpack your ESP/950 Electrostatic Stereophone System to insure
that the system is complete and intact.
The ESP/950 Electrostatic Stereophone System includes:
• ESP/950 Stereophone
(the earcup and headband assemblies are separate to allow convenient and
protective packaging. To assemble refer to step 2 of the set-up instructions)
• E/90 Energizer/Amplifier
•AD E/90 120 Volt AC Adapter (9VDC at 1A) (AD E/90-E 220 Volt AC Adapter for
Europe)
• Battery Supply Box (Batteries not included)
• Stereophone Extension Cord
