ShenZhen Korno Import&Export Co.,Ltd
http://szkorno.en.made-in-china.com
15
concentration figure.
6.2 Function Menu Instruction
Long press”OK” button for 5 seconds to enter function menu as shown in figure 10. Nine
sub-menus are including in function menu:Basic setting
、
History Log
、
RealTime Curve
、
Zero calibration
、
Target calibration
、
Alarm setting
、
Measure Mode
、
Storage setting
、
Print Setting
、
Time Setting
、
Factory Setting.In main menu move the cursor to different
sub-menu by press “Up” and “Down”button,press “Ok” to enter corresponding sub-menu,
press “Back” to return to normal detection interface or previous menu.
6.2.1 Basic Setting
In Basic setting menu user can see various setting as shown in figure 11,press “Up” and
“Down” button to move the cursor , press “Ok”to enter sub-menu and modify parameters.
1. Sensor setting:(as shown in figure 12)User set detection range and units( ppm
、
mg/m
³、
mg/L
、
%VOL)of different gas
2. Channel setting:In this menu user can set to activate/shield one or various
gas channels as shown in figure 13,and also allow user to check channel address.
3. Temp Correction:In this menu user were allow to modify the temperature parameter
manually as shown in figure 14.
