Instruction manual – Fabula
You are the owner of the model Fabula a high-quality manual grain
mill. It was manufactured for you by artisanal craftsmanship.
Before you start the milling, please note the following points:
The milling
Keep the mill between the thighs – close to the knees – in a sitting
position. The grinded sides make it easier to hold. Turn the handle to
the right (clockwise)
Running in
First you should run the mill in. Do this by milling approx. 30 gramms
(One tablespoon)
of dry grains (wheat, millet or barley are particularly suitable
for this) at a medium setting.
Turn the handle clockwise.
The first time you use the mill, abrasion of the millstone occurs
which is perfectly harmless to health but can contain stone
particles. That’s why it is not suitable for consumption.
Setting the fineness
Select the desired coarseness by removing the collection cup
by turning to the left. For a fine grinding turn the adjustment
knob to the right and for a coarse grinding turn it to the left.
Insert the collection cup again and fix it by turning to the
right. (Please do not fasten too tightly!) Fill in the grains and
try the fineness of grinding, If necessary readjust.
Suitable grains
You can use the mill to grind all types of grain, except corn.
To grind oil seeds, mix them with dry grains. If you grind oat
types with a high oil content at fine settings, the grinding
mechanism may clog. (See cleaning and care). Please use only
dry and cleaned grains.
Desk mount available
as optional accessory
Michael Gergen
Hüttenstraße 6
D-66839 Schmelz
Tel. +49 (0) 68 87-1557
Fax. +49 (0) 68 87 - 77 77 24
www.kornkraft.de
[email protected]
G
E T R E I D E M Ü H L E N