72
2–1: MIDI Ch 1–8
(MIDI Ch T01–08)
2–2: MIDI Ch 9–16
(MIDI Ch T09–16)
Here you can make MIDI-related settings for each track.
2–1(2)a: Status, MIDI Channel, Bank Select
Status
[INT, Off, BTH, EXT, EX2]
This sets the status of MIDI and the internal tone generator
for each track.
INT:
When the musical data recorded in the track is played
back, or when you use “Track Select” (0–1a) to select a track
that is set to INT and play the keyboard and operate the
controllers, the internal tone generator of the TRITON
Extreme will sound, and MIDI data will not be transmitted
to an external device.
Off:
The program will not sound, nor will MIDI data be
transmitted.
BTH:
The operation of both INT and EXT will be per-
formed. When the musical data recorded in the track is
played back, or when you select a track that is set to BTH
and play the keyboard and operate the controllers, the inter-
nal tone generator of the TRITON Extreme will sound, and
at the same time MIDI data will also be transmitted to an
external device.
EXT:
When the musical data recorded in the track is played
back, or when you select a track that is set to EXT and play
the keyboard and operate the controllers, MIDI data will be
transmitted to an external device, but the internal tone gen-
erator of the TRITON Extreme will not sound.
When you select another song or return to the beginning of
the song, the program change, volume, panpot, portamento,
sends 1 and 2, post IFX pan, and post IFX sends 1 and 2 of
each track set to EXT will be transmitted via MIDI.
EX2:
“Bank Select (When Status=EX2)” will be enabled.
Instead of the A–N bank numbers that can be selected on the
TRITON Extreme, the bank number you specify here will be
transmitted. In other respects this is the same as EXT.
MIDI data is transmitted and received on the MIDI
channel that is specified separately for each track by
“MIDI Channel.”
MIDI Channel
[01…16]
Specifies the MIDI channel that the track will use to transmit
and receive musical data. The MIDI channel you specify
here will be the receive channel when “Status” is INT, the
transmit channel when it is EXT or EX2, and the receive/
transmit channel when it is BTH. Tracks set to INT which
have the same MIDI channel will sound and be controlled
identically when they receive MIDI data or data from the
sequencer tracks.
Bank Select (When Status=EX2) [000:000...127:127]
When “Status” is set to EX2, this sets the bank number that
will be transmitted.
The left value is the MSB, and the right value is the LSB.
When “Status” is other than EX2, this setting has no effect.
2–3: OSC 1–8
(OSC T01–08)
2–4: OSC 9–16
(OSC T09–16)
These parameters specify how each track will be sounded.
2–3(4)a: Force OSC Mode, OSC Select, Portamento
Force OSC Mode
[PRG, Poly, MN, LGT]
Selects the Voice Assign Mode (Program P1: 1–1b) of the pro-
gram selected for each track 1–16 (
☞
Combination P2: 2–2a).
OSC Select
[BTH, OS1, OS2]
Specifies the “Oscillator Mode” of the program selected for
each track 1–16. If the “Oscillator Mode” is Double, you can
use this setting to make only one or the other oscillator
sound (
☞
Combination P2: 2–2a).
Portamento
[PRG, Off, 001...127]
Specifies the portamento effect for each track 1–16 (
☞
Com-
bination P2: 2–2a).
The portamento setting you make here will be used
when the song is played or recorded from the begin-
ning. If you change the setting while recording, it will
be recorded as part of the musical data. (However if
you set this to PRG, it will not be recorded.) You can
change this setting during playback. However if you
come to any Portamento On/Off data or Portamento
Time data that was recorded, the settings will change
accordingly.
When the track whose “Status” (2–1a/2a) is INT or
BTH
, MIDI control change CC#5 (Portamento Time)
and CC#65 (Portamento Switch) can be received to con-
trol this and change the setting. (If the setting is PRG,
CC#05 Portamento Time will not be received.)
When you switch songs or return to the beginning of
the song, tracks whose “Status” is BTH, EXT, or EX2
will transmit this setting via MIDI. If this is Off, CC#65
with a value of 0 will be transmitted. If this is 001–127, a
Recorded data Keyboard
and controller operations
Received data
Status
Internal tone
generator
MIDI OUT
Internal tone
generator
MIDI OUT
INT
●
✕
●
—
EXT, EX2
✕
●
✕
—
BTH
●
●
●
—
Sequencer P2: Trk Param
0–1
0–1a
2–1a
LSB
MSB
0–1b
0–3a
0–1
0–1a
2–3a
0–1b
0–3a
Summary of Contents for TRITON Extreme
