- 40 -
Configuration Guide
HI-HAT CALIBRATION
Used to adjust the open/close action of the hi-hat cymbal.
[CALIB] function button
If the action doesn’t feel right or when you are making the settings for the first time, you
will need to perform calibration.
• Adjusting the Hi-Hat Open position
Stabilize the sensor on the top pad of the hi-hat cymbal so that it does not touch the
bottom pad (with the hi-hat open), and calibrate the hi-hat cymbal when open.
When the message below appears, press the ENTER
button.
• Adjusting the Hi-Hat Close position
Free the clutch of the hi-hat cymbal’s top pad, leaving
the top pad of the hi-hat resting on the bottom pad. Calibrate the hi-hat in closed posi-
tion.
When the message below appears, press the ENTER but-
ton.
“Completed!” will be displayed, which confirms the calibration settings.
If the calibration settings are incorrect, “Calibration Error” will be displayed. Try ad-
justing once more.
Sensor
Open without top hat
sensor touching the
bottom hat