Korg Pa588 User Manual Download Page 71 | Manualshive

Page: 71 / 252

Korg Pa588 User Manual Download Page 71

67

The SongBook

Creating a Custom List

Quick Guide

Creating a Custom List

You can create several Custom Lists in the SongBook, to make a set of entries suitable for your various
shows. Before starting a new Custom List, be sure you have added all needed entries to the SongBook
main database (see “Adding entries” above).

1

While in SongBook mode, open the page menu and check the ‘Enable List
Edit’ item.

2

Select a Custom List to be edited.

To edit an existing list, press the Custom List tab to open the Custom List page, and select one of
the available Custom Lists. To create a new list, press the List Edit tab to open the List Edit page,
and press the New List button to create a new, blank list.

3

Press the Book tab to open the Book page and see the full database. Use
the various sorting, searching and filtering options (seen above) to find
the entries you are looking for. Press the Add to List button when the
desired entry has been selected.

After you check the

‘Enable List Edit’ item, the

List Edit page becomes

available.

Press this check-

box to turn the

view filter on (if

any).

Press this button to edit

the view filter.

Use the scroll bar to
see all Songs in the
list. Keep SHIFT
pressed and touch
the Up/Down arrow
to scroll to the next/
previous alphabetic
section.

As an alter-

native, you can use
the DIAL.

SongBook list

Adds the highlighted entry to the
Custom List.

Pa588-100UM-ENG.book Page 67 Monday, May 26, 2008 4:34 PM

«
...
69
70
71
72
73
...
»

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments