Korg Pa588 User Manual Download Page 65 | Manualshive

Page: 65 / 252

Korg Pa588 User Manual Download Page 65

61

The SongBook

Selecting the desired entry from the Main List

Quick Guide

Selecting the desired entry from the Main List

A large database is already included with the instrument, and you can later customize it. You may
browse through this database in a variety of ways.

1

While you are in Style Play or Song Play mode, press the SONGBOOK
button to open the SongBook window.

2

Browse through the entries.

Icons in the Type column will help you identify the type of the entry. The Genre column is
shown by default, but you can switch to the Artist column (see “Displaying Artist or Genre”
below).

3

When the entry is visible in the display, touch it (to highlight it) and press
the Select button in the display.

After selecting an entry, the corresponding Style, SMF or KAR file will be recalled, together with
the relevant operating mode (Style Play or Song Play). Up to four STSs will also be recalled. Any
TXT file associated with the entry can be seen in the Lyrics/STS page.

The selected Style, SMF or KAR file, is shown in the higher part of the screen.

Press this check-

box to turn the

view filter on.

Press this button

to edit the view

filter.

Adds the selected entry
to the Custom List (if
activated – see page 67).

Press this button to
select the current entry
to play.

Use the scroll bar to see
all Songs in the list. Keep
SHIFT pressed and touch
the Up/Down arrow to
scroll to the next/previ-
ous alphabetic section.

As an alternative, you
can use the DIAL.

SongBook Main

List

Style or Standard MIDI File(s) currently

assigned to the arranger or sequencer(s)

Sorting order

Pa588-100UM-ENG.book Page 61 Monday, May 26, 2008 4:34 PM

«
...
63
64
65
66
67
...
»

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments