Korg Pa588 User Manual Download Page 59

Page: 59 / 252

The Metronome

Adding harmony notes to your right-hand melody with the ENSEMBLE function

Quick Guide

Pa588 incorporates a handy metronome, with which you can beat the tempo while practicing.

While in Style Play mode, select the Metronome Style corresponding to
the desired Time Signature.

Metronome Styles can be found in the fourth page of the bank World 2.

Use the TEMPO/VALUE DIAL to set the Tempo.

Press the START/STOP button to start the metronome.

Use the VARIATION buttons to select one of the metronome accents.

Use the BALANCE slider to set the metronome’s volume.

Press the START/STOP button again to stop the metronome.

The Metronome

Var 1 = No accent
Var 2 = Accent on the first step
Var 3 = Bell on the first step
Var 4 = Sticks

Summary of Contents for Pa588





























































































































































































































































Search results

Summary of Contents for Pa588

Reviews:

Korg Pa588, User Manual, Page: 59 / 252

Search results

Summary of Contents for Pa588

Reviews: