manualshive.com logo in svg

Korg Pa588, User Manual, Page: 47 / 252

Share
Download
Korg Pa588 User Manual Download Page 47

43

Selecting and saving Performances

Raising or lowering the Upper octave

Quick Guide

The Performance is the musical heart of the Pa588.

 Unlike selecting single Sounds, selecting a Per-

formance will recall several Sounds at the same time, the needed effects and transpositions, plus many
more parameters useful for playing in a musical situation.

You can save all control panel settings in a Performance memory location. While many Performances
are already supplied with the instrument, you can customize each of them to your own taste, and then
save them in their customized form.

Similar to Performances, you can also save your settings to a 

Single Touch Setting (STS),

 which will

store all the settings for the Keyboard tracks. Four STSs are supplied with each Style and SongBook
entry, and can be selected with the four dedicated buttons under the display.

As far as Style tracks are concerned, you can save settings in a third object called the 

Style Perfor-

mance

.

Please note that most of the settings saved in Performance 1 are automatically selected when the
instrument is turned on. However, the Pa588 will always turn on with a Grand Piano sound assigned
to the full keyboard.

Selecting and saving Performances

Performance/Sound Select section

Single Touch Settings (STS) section

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments