manualshive.com logo in svg

Korg Pa588, User Manual, Page: 45 / 252

Share
Download
Korg Pa588 User Manual Download Page 45

41

Playing Sounds

Playing different Sounds with your left and right hand

Quick Guide

Playing different Sounds with your left and right hand

You can play a single Sound with your left hand, in addition to playing up to three Sounds with your
right hand.

1

Press the SPLIT button on the control panel, to turn its LED on and split the
keyboard into Lower (left hand) and Upper (right hand) parts.

2

Be sure the Lower track is set to play.

3

Play the keyboard.

 

Hint:

 You can select a

different Sound for the
Lower part, by follow-
ing the same procedure
used for the Upper 1
track. See page 37.

4

Return to the full keyboard playing mode by pressing the SPLIT button on
the control panel, to turn its LED off.

Lower

Upper

If the Lower track is muted, press 
its 

 icon to make it disap-

pear from this area.

i

Note how the keyboard is split into two parts, each playing dif-
ferent sounds.

Lower

Upper

(Full) Upper

Pa588-100UM-ENG.book  Page 41  Monday, May 26, 2008  4:34 PM

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments