manualshive.com logo in svg

Korg Pa588, User Manual, Page: 233 / 252

Share
Download
Korg Pa588 User Manual Download Page 233

229

Media edit mode

SD and MMC cards

Reference

data on the card, move the switch back to its original unpro-
tected setting. 

Inserting/exchanging cards 

Inserting a card 

Insert the card, making sure that it is oriented correctly. The gold
contacts should be facing down, and the angled corner to your
right.

Removing a card 

Press the card inward and release it, and the card will pop out. 

Note:

 Before you can use an SD card, you must format it on the

Pa588. The card may not work if it was formatted on another
device.

Organizing your data into separate folders

We suggest to organize your data into separate folders, instead of
saving many files into the root (i.e., the main level) of the card.
This allows for faster accesses to the card, thus a quicker
response of the Pa588 to your Media commands.

Write-protect

switch

Protected

SD card slot

SD card

Pa588-100UM-ENG.book  Page 229  Monday, May 26, 2008  4:34 PM

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments