Korg Pa588 User Manual Download | Manualshive

Page: 11 / 252

background image

7

Easy Mode

The Style Play (Easy Mode) page in detail

Introduction

The Style Play (Easy Mode) page in detail

Notes:

• There are three Sounds for the right hand (Upper 1, Upper 2,
Upper 3), and only one Sound for the left hand (Lower). Their
names are abbreviated as UP1, UP2 UP3, LOW, and are shown
in the right side of the display.

• Right hand (Upper) and left hand (Lower) Sounds are sepa-
rated by the Split Point.

• Performances and STSs are collections of Sounds. Just choose
one of them to change all the Sounds of the keyboard (and,
when the STYLE CHANGE LED is lit on the control panel, of
the Style).

• Choose a Style to change the musical style of the accompani-
ment patterns. Touching the Style name in the display is the
same as to press one of the buttons of the STYLE section on the
control panel.

Sound icon and status. If
the

icon appears,

the Sound is in mute and
cannot be heard. If the
icon does not appear, the
Sound is in play and can
be heard.

→

Sounds assigned to the right hand (UP1 to UP3)
and to the left hand (LOW). Touch the Sound’s
name to open the Sound Select window and
choose a different Sound.

→

Style name and info. Touch the Style’s name
to open the Style Select window and choose

a different Style.

→

Tempo. Use the

DIAL to change it.

Length of the accompaniment

pattern, and current beat.

Performance or STS. Touch it to

open the Performance Select win-

dow and choose a different Per-

formance. Sounds on the

keyboard will change.

→

Touch here to change the
Split Point.

→

Close this lock to avoid
transposition when
choosing a different
Performance or Style.

→

Single Touch Settings (STS). Touch one of them to choose it, or use the dedicated

buttons on the control panel. Sounds on the keyboard will change.

→

Touch it to adjust the tracks pan

and volume.

→

Touch it to choose and program

the effects.

→

Pa588-100UM-ENG.book Page 7 Monday, May 26, 2008 4:34 PM

«
...
9
10
11
12
13
...
»

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments

Related manuals for Pa588

Brand: Kawai Pages: 48

Brand: Xtrfy Pages: 6

Brand: Valore Pages: 3

Brand: Sonics Pages: 19

Brand: Safire Pages: 16

MedicalKey AK-C4110

Brand: Active Key Pages: 2

MedicalKey AK-C8100

Brand: Active Key Pages: 2

Brand: Active Key Pages: 2

Brand: Active Key Pages: 2

Brand: Active Key Pages: 2

Brand: Logitech Pages: 2

BLUETOOTH KEYBOARD

Brand: Motorola Pages: 80

iDEN Keyboard Mini 32K

Brand: Motorola Pages: 22

KZ450 Wireless Keyboard w Device Stand

Brand: Motorola Pages: 76

Brand: Motorola Pages: 27

KZ500 Wireless Keyboard with Trackpad

Brand: Motorola Pages: 76

Brand: Motorola Pages: 10

Wireless Keyboard

Brand: Motorola Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands