Korg Pa588 User Manual Download

Page: 104 / 252

100

Style Play operating mode

Preferences: Style Play Setup

Velocity Control

Set this parameter to trigger one of the following functions sim-
ply by playing louder with your left hand. When playing with a
velocity value higher than the value set by the “Velocity Control
Value” parameter (see page 101), the selected function will be
activated.

Note:

This function only works when the SPLIT LED is turned on.

It does not work when it is turned off.

Off

The function is turned off.

Break, Fill In 1, Fill In 2

When playing with a velocity higher than the
trigger value on the Lower track, the selected ele-
ment is automatically triggered.

Start/Stop

You can start or stop the Style by playing harder
on the keyboard.

Memory

When playing with a velocity higher than the
trigger value, the Memory function will be acti-
vated or deactivated.

Scale Mode

This parameter defines which tracks are affected by the selected
alternative scale (see “Scale” on page 90).

Keyboard tracks

The scale will only affect Keyboard tracks.

Upper tracks The scale will only affect Upper 1-3 Keyboard

tracks.

All Tracks

The scale will affect all tracks (Keyboard, Style,
Pads).

Memory Mode

This parameter sets the way the MEMORY button works.

Chord

When its LED is on, the MEMORY button keeps
the recognized chord in memory. When its LED
is off, the chord is reset when raising the hand
from the keyboard.

Chord + Lower

When its LED is on, the MEMORY button keeps
the recognized chord in memory, and keeps the
Lower track held until the next note or chord is
played. When its LED is off, the chord is reset
when raising the hand from the keyboard, and
the Lower track is not sustained.

Fixed Arr. + Lower

When its LED is on, the MEMORY button keeps
the Lower track held until the next note or chord
is played. When off, the Lower track is not sus-
tained when raising the hand from the keyboard.
The chord is always kept in memory.

Lock icon

All parameters in this page may be protected from selecting a
different Performance or STS.

This lock is reset when turning the instrument off, unless you
write Global settings to memory (see “Write Global - Global
Setup dialog box” on page 212).

For more information on parameter locks, see “General Con-
trols: Lock” on page 203.

Preferences: Style Play Setup

In this page you can set various general parameters for the Style
Play mode.

Note:

These settings are stored in the Style Play Setup area of the

Global file (together with all the other parameters marked with the

abbreviation through the manual). After changing these

settings, select the Write Global-Style Play Setup command from
the page menu to save them to the Global.

Midi Setup

MIDI channels for the Style Play mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
“MIDI” on page 230 for more information on using MIDI Set-
ups.

Note:

To automatically select a MIDI Setup when entering the

Style Play mode, select the Write Global-Style Setup command
from the page menu.

For detailed information on MIDI Setup settings, see “MIDI
Setup” on page 37 of the Data Lists manual (in the Accessory
CD).

Note:

After selecting a MIDI Setup, you can go to the Global mode

and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the Write
Global-Midi Setup command from the page menu. All MIDI Setup
can be freely customized and overwritten.

Hint:

To restore the original MIDI Setups, load the original Fac-

tory data again (downloadable from

www.korgpa.com

Performance/Sound Default

Performance banks and Sound banks share the same buttons on
the control panel. Use this parameter to define whether the PER-
FORMANCE SELECT or the SOUND SELECT LED must be on
when you turn the instrument on.

Gbl

Sty

Pa588-100UM-ENG.book Page 100 Monday, May 26, 2008 4:34 PM