manualshive.com logo in svg

Korg Pa588, User Manual, Page: 10 / 252

Share
Download
Korg Pa588 User Manual Download Page 10

6

Easy Mode

If you have never used an instrument so rich in features as this
before, we suggest you to use your Pa588 in Easy Mode. Easy
Mode allows you to play Styles and Songs with a simple user
interface, free from the many advanced parameters that you will
want to learn at a later date.

Easy Mode is turned on by default, when you first buy the
instrument. If it isn’t for some reason, or want to return there
after you have turned if off, please follow the steps below.

Turning the Easy Mode on

Touch the little rectangle on the top right corner of the display,
to open the 

page menu:

Touch the “Easy Mode” menu item, to make the checkmark
appear:

At this point, the Easy Mode has been activated, and the ele-
ments in the display appear less cluttered:

Turning the Easy Mode off

The instrument will stay in this mode even after having been
turned off. Repeat the above operation when you want to deacti-
vate the Easy Mode.

Switching between Styles and Songs

Depending on what you want to play, you must switch to Style
Play mode or Song Play mode.

•

Press the STYLE PLAY button to switch to the Style Play
mode and play Styles. This is the mode you are in when you
first turn the instrument on.

•

Press the SONG PLAY button to switch to the Song Play
mode and play Songs.

Easy Mode

The page menu

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments