Korg Pa588 User Manual Download Page 57 | Manualshive

Page: 57 / 252

Korg Pa588 User Manual Download Page 57

53

Selecting and playing Styles

Adding harmony notes to your right-hand melody with the ENSEMBLE function

Quick Guide

Adding harmony notes to your right-hand melody with the
ENSEMBLE function

Chords played with your left hand may be applied to the right-hand melody.

1

Press the SPLIT button to split the keyboard.

The Ensemble function only works in Split mode.

2

Press the ENSEMBLE button to turn its LED on.

3

Play chords with the left hand and single notes in the right hand.

4

To select a different harmonization style, keep the SHIFT button pressed,
and press the ENSEMBLE button to open the Ensemble page.

This is a fast ‘shortcut’ to recall this page. The longer would have been entering the Edit mode by
pressing the MENU button, then going to the Ensemble page.

Notice how the right hand is automatically harmonized,
according to the chords composed with your left hand.

While the Ensemble parameter is
selected, use the TEMPO/VALUE dial
to select one of the available harmo-
nization types.

Pa588-100UM-ENG.book Page 53 Monday, May 26, 2008 4:34 PM

«
...
55
56
57
58
59
...
»

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments