manualshive.com logo in svg

Korg Pa588, User Manual, Page: 243 / 252

Share
Download
Korg Pa588 User Manual Download Page 243

239

Assembling the stand

Appendix

2.

Open the stand (A) by unfolding the legs (A’) and diagonal
bars (A”), as shown in the following illustration.

3.

Use the two short screws (b) to fix the diagonal bars (A”).
Be sure you insert a washer (d) between the diagonal bar
and the hole in the stand.

4.

Prepare the pedal beam (B), by removing the two caps (e)
from both sides.

5.

Fit the pedal beam (B) and the legs (A’) together, with the
curved part pointing toward the back of the stand (as
shown in the illustration). Fix them by using the two long
screws (a).

6.

Lay the pedal (C) on the pedal bar (B).

7.

Lift the instrument (D) with two or more people, and fix it
to the stand (A), so that the carved, molded guides on the
bottom of the instrument perfectly match the top of the
stand. Also, be sure the rubber feet exactly match the three
points in each of the left and right stand’s stay.

Felt

Stand seen from underneath

Stays

StandAssembly.fm  Page 239  Wednesday, June 11, 2008  11:47 AM

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments