manualshive.com logo in svg

Korg Pa588, User Manual, Page: 242 / 252

Share
Download
Korg Pa588 User Manual Download Page 242

238

Assembling the stand

Cautions for assembly

•

When placing the instrument on the stand, be careful not to pinch your hands.

•

Be sure that the correct parts are assembled in the correct orientation and position, and follow the steps in order.

•

Do not apply weight to the front edge of the instrument before tightening the screws, otherwise the instrument may fall down.

Assembling procedure

1.  

Open the packing carton and take out the contents. Check that all of the following items are available.

NB:

 You will need a cross-point (Phillips #2) screwdriver for assembly.

Assembling the stand

List of parts

A

Piano stand 

(includes parts A’ and A” – please refer to the next page)

×

 1

B

Pedal “beam” 

(includes parts e – see page 239)

×

 1

C

Pedal

×

 1

D

Instrument (main body)

×

 1

E

Power supply

×

 1

F

Power cable

×

 1

a

Long screws M6

×

30

×

 2

b

Short screws M6

×

20

×

 2

c

Wing bolts M6

×

20

×

 2

d

Washers

×

 2

StandAssembly.fm  Page 238  Wednesday, June 11, 2008  11:47 AM

Summary of Contents for Pa588





























































































































































































































































Reviews:

No comments