Korg Pa3XLe, User Manual, Page: 108 / 472

104 Selecting elements
Style Select window
The following windows are shown in the various operating
modes, whenever you try to select a Sound, Performance, STS,
Style, Pad or Song.
Style Select window
To open the Style Select window, touch the Style area whereas it
appears in the display, or one of the buttons in the STYLE sec-
tion on the control panel.
Press EXIT to exit from this page and go back to the previous
page without selecting any Style.
Note: Depending on the status of the “Auto Select” parameter (see
page 254), a Style may be immediately selected when pressing one
of the STYLE buttons. The latest selected Style for that bank will be
selected.
Style sets
Selectable sets of Styles. Factory Styles are Styles supplied as
standard. Fav/User are Favorite Styles (locations for custom-
made Styles with editable names) and User Styles (locations for
custom-made Styles with fixed names).
Side tabs (banks)
Use these tabs to select a bank of Styles. Favorite tabs can be
renamed (see “Renaming the Favorite banks” on page 133).
Lower tabs (pages)
Use these tabs to select one of the available pages in the selected
bank.
Styles
Touch one of these buttons in the display to select a Style. Unless
the “Display Hold” parameter (see page 254) is turned on, the
window automatically closes shortly after you select a Style.
After selecting a Style from this window, and another Style is
playing, the name of the new Style name begins to flash, mean-
ing it is ready to start playing at the beginning of the next mea-
sure.
Style Select page menu
Touch the page menu icon to open the menu. Touch a command
to select it. Touch anywhere in the display to close the menu
without selecting a command.
Copy and Paste
Use this command to copy the selected Style to a different loca-
tion,
1.
Select the Style to be copied. To select more items, keep the
SHIFT button pressed and touch all the item to be selected
for copying.
Hint: You can deselect one of the selected items
by touching it while still keeping the SHIFT button pressed.
You can deselect all by touching a single item.
2. Choose the Copy and Paste command.
3. Select the target location. In case you are copying more
than a single item, all subsequent items will sequentially
follow the first one. If there aren’t enough locations avail-
able, the procedure will be cancelled.
Warning:
If you con-
firm, any Style already existing at the target location will be
overwritten!
Rename
Use this command to edit the name of the selected item. Please
keep in mind that you can only rename non-protected items.
1. Select the Style to be renamed.
2. Choose the Rename command, and use the virtual key-
board to edit the name.
3. When done, touch OK to confirm.
Delete
Choose this command to delete the selected item. Please keep in
mind that you can only delete non-protected items.
1. Select the Style to be deleted. To select more items, keep the
SHIFT button pressed and touch all the item to be selected
for deleting.
Hint: You can deselect one of the selected items
by touching it while still keeping the SHIFT button pressed.
You can deselect all by touching a single item.
2.
Choose the Delete command, and confirm deletion.
Warn-
ing: Unless you have a copy of it, the deleted item will be gone
forever!
Selecting elements
Side tabs (banks)
Lower tabs (pages)
Style sets
Styles
Pa3XLe User Manual v100 (English).book Page 104 Thursday, May 29, 2014 5:42 PM