Korg Pa300 User Manual Download Page 35

Page: 35 / 378

Playing the Demo

Starting and stopping the Demo

Quick Guide

Listen to the built-in Demo Songs to appreciate the power of Pa300. There are several Demo Songs to
choose from.

Starting and stopping the Demo

Here is how to start, choose and stop the Demo Songs.

Press the STYLE PLAY and SONG PLAY buttons together.

The LED of the two buttons will start blinking. Pa300 will be set in Demo mode.

At this point, if no other button is pressed, a selection of the best Demo Songs will be played
back.

In case you want to listen to a specified Demo Song, select one of the available options
on the display (Full Songs, Solo Instruments, Styles).

Playing the Demo

Demo buttons

Pa300 User Manual v150 (English).book Page 31 Saturday, March 29, 2014 5:29 PM

Summary of Contents for Pa300



























































































































































































































































































































































































Search results

Summary of Contents for Pa300

Reviews:

Related manuals for Pa300

Brands by name

Popular brands

Korg Pa300, User Manual

Search results

Summary of Contents for Pa300

Reviews:

Related manuals for Pa300

Brands by name

Popular brands